Skip to content
Glossary

What Is a Post Base?

A Post Base is a connector that fastens a pergola post to a concrete footing, slab, or other structural support. It keeps the post positioned above the supporting surface and transfers the pergola’s weight into that support. Some models also help limit direct wood contact with damp concrete.

Reviewed by Adam Gorski

Local relevance: North Bend's wet winters can leave outdoor concrete and soil damp, so pergola post bases need careful separation between wood and moisture-prone supports.

Quick Facts About Post Base

Category

Structural connector

Used for

Pergola post attachment

Common confusion

Not the concrete footing

Also called

Post Anchor

Often discussed with

Pergola Installation

Key Takeaways About Post Base

  • A metal connector joins the post to its structural support.
  • The base helps keep wood above damp concrete.
  • A post base isn't the same as the concrete footing.

How Post Base Works

Hands tighten a wooden post into a metal base on a concrete footing outdoors

Post Base hardware connects a pergola post to a footing, slab, or other support. Fasteners pass through the connector and into the post and supporting material. The connection helps hold the post in position as the structure carries its load.

Related glossary terms: Deck Footing, Ledger Board, Soil Compaction.

The base's shape must match the post and the support beneath it. Some designs sit on top of concrete, while others connect to hardware set into fresh concrete. A raised connection can reduce direct contact between wood and wet surfaces. The post base doesn't replace the footing, anchors, or fasteners that support the connection.

During pergola installation, the base is aligned before the post is secured. The installer checks that the post stands straight and that the hardware fits tightly. Concrete footing provides the support below, while a post anchor describes hardware that connects the post to that support.

A person points at a metal bracket on a stone block beside a laptop and hammer on a wooden desk

Expert Note

When we install a pergola, we check the post base against the post size and the supporting surface. We align each base before tightening the fasteners, then check the post for plumb and movement. Wet conditions also make the separation between wood and concrete worth close attention.

Post Base in Practice: A Real-World Example

A pergola planned for a concrete patio may use a metal post base at each post location. The base attaches to the patio support and holds the wood post upright above the surface.

Related Terms

Deck Footing

A deck footing is a below-ground support that transfers the weight of a deck, posts, and…

Ledger Board

Ledger Board is a horizontal structural board fastened to a house to support one side of…

Soil Compaction

Soil Compaction is the process of pressing soil particles closer together, which reduces open space between…

Gravel Base

Gravel Base is a compacted layer of crushed stone placed beneath pavers or other hard surfaces…

LandscaperSammamishwa.com

Have Questions About Post Base?

Contact LandscaperSammamishwa.com for practical guidance on Post Base and related landscape architect company work in North Bend.

(425) 587-8011