Skip to content
Glossary

What Is a Ledger Board?

Ledger Board is a horizontal structural board fastened to a house to support one side of an attached deck. Deck joists connect to the ledger board, while posts and beams support the outer edge. Proper attachment transfers deck loads into the house and helps keep the platform aligned with the building.

Reviewed by Adam Gorski

Local relevance: North Bend’s wet winters can keep wood damp, so ledger connections need careful flashing and drainage planning where decks meet house walls.

Quick Facts About Ledger Board

Category

Deck structural component

Used for

Supporting attached deck joists

Common confusion

Often confused with a deck beam

Also called

Deck Ledger

Often discussed with

Deck Installation

Key Takeaways About Ledger Board

  • A ledger board connects an attached deck to the house.
  • Flashing helps keep water from reaching the wall behind the board.
  • A ledger board is not the same as a deck beam.

How Ledger Board Works

A wooden ledger board with metal fasteners hangs above screws, a bracket, and a hammer on a beige wall

A ledger board sits against the house at the deck connection point. Joist hangers or similar connectors hold the deck joists to the board. The board transfers part of the deck load into the house, while the outer framing carries the remaining load through beams and posts.

Related glossary terms: Deck Joist, Deck Footing, Post Base.

Flashing fits above and behind the ledger connection to guide water away from the wall. The wall surface, siding, and framing affect how the connection gets prepared. Deck joists run outward from the ledger, and a deck beam supports their far ends.

Hands use a drill to fasten a wooden beam to a gray wall outdoors

Expert Note

When we plan a deck connection, we check the house wall, siding, framing, and drainage path before placing the ledger board. We also align the board with the deck layout and coordinate flashing with the wall materials. These checks help the ledger work as part of the full deck frame.

Ledger Board in Practice: A Real-World Example

For a backyard deck attached to a home, the ledger board runs along the house wall at the deck floor level. Joists connect to the ledger, while the opposite edge rests on a beam supported by posts.

Related Terms

Deck Joist

A deck joist is a horizontal structural member that supports deck boards and transfers their load…

Deck Footing

A deck footing is a below-ground support that transfers the weight of a deck, posts, and…

Post Base

A Post Base is a connector that fastens a pergola post to a concrete footing, slab…

Gravel Base

Gravel Base is a compacted layer of crushed stone placed beneath pavers or other hard surfaces…

LandscaperSammamishwa.com

Have Questions About Ledger Board?

Contact LandscaperSammamishwa.com for practical guidance on Ledger Board and related landscape architect company work in North Bend.

(425) 587-8011